A black-and-white photo of a person mid-air in a Superman-style body suspension pose, supported by multiple hooks in their back and legs, smiling joyfully toward the camera. They are suspended horizontally in a large indoor space with high ceilings and visible rigging. A group of onlookers—some seated, some standing—watch with expressions of admiration, amusement, and support. The atmosphere is lively and communal, capturing a moment of shared experience and transformation.

How to make pancakes: Erebli’s Recipe

“My favorite pancake recipe”

Comments

64 responses to “How to make pancakes: Erebli’s Recipe”

  1. cuntcumber Avatar

    What’s the string?

  2. cuntcumber Avatar

    What’s the string?

  3. cuntcumber Avatar

    What’s the string?

  4. cuntcumber Avatar

    What’s the string?

  5. LifeRush Avatar

    impressive! and soooo painful.

  6. LifeRush Avatar

    impressive! and soooo painful.

  7. LifeRush Avatar

    impressive! and soooo painful.

  8. LifeRush Avatar

    impressive! and soooo painful.

  9. quinnn Avatar
    quinnn

    I can’t remember feeling so confused.

  10. quinnn Avatar
    quinnn

    I can’t remember feeling so confused.

  11. quinnn Avatar
    quinnn

    I can’t remember feeling so confused.

  12. quinnn Avatar
    quinnn

    I can’t remember feeling so confused.

  13. attinoss Avatar
    attinoss

    looks like he maybe tied off his cock first; probably why there is so much blood around it’s edge

  14. attinoss Avatar
    attinoss

    looks like he maybe tied off his cock first; probably why there is so much blood around it’s edge

  15. attinoss Avatar
    attinoss

    looks like he maybe tied off his cock first; probably why there is so much blood around it’s edge

  16. attinoss Avatar
    attinoss

    looks like he maybe tied off his cock first; probably why there is so much blood around it’s edge

  17. Sah Avatar
    Sah

    That’s a guy? I just can’t figure out which bit is which.

  18. Sah Avatar
    Sah

    That’s a guy? I just can’t figure out which bit is which.

  19. Sah Avatar
    Sah

    That’s a guy? I just can’t figure out which bit is which.

  20. Sah Avatar
    Sah

    That’s a guy? I just can’t figure out which bit is which.

  21. attinoss Avatar
    attinoss

    balls squished at the bottom of the clear plate, penis above it (very spread out from the squishing mind you). I don’t think his bits are going to be useable ever again but that’s likely the intention isn’t it? i just worry that the poor guy is gonna get blood poisioning or some other horrific thing. guess they don’t call it bme hard for nothing, lol

  22. attinoss Avatar
    attinoss

    balls squished at the bottom of the clear plate, penis above it (very spread out from the squishing mind you). I don’t think his bits are going to be useable ever again but that’s likely the intention isn’t it? i just worry that the poor guy is gonna get blood poisioning or some other horrific thing. guess they don’t call it bme hard for nothing, lol

  23. attinoss Avatar
    attinoss

    balls squished at the bottom of the clear plate, penis above it (very spread out from the squishing mind you). I don’t think his bits are going to be useable ever again but that’s likely the intention isn’t it? i just worry that the poor guy is gonna get blood poisioning or some other horrific thing. guess they don’t call it bme hard for nothing, lol

  24. attinoss Avatar
    attinoss

    balls squished at the bottom of the clear plate, penis above it (very spread out from the squishing mind you). I don’t think his bits are going to be useable ever again but that’s likely the intention isn’t it? i just worry that the poor guy is gonna get blood poisioning or some other horrific thing. guess they don’t call it bme hard for nothing, lol

  25. Veal Avatar
    Veal

    No one ever made me wish I had a cock more than Erebli 🙂 bless him!
    And attinoss, you should check out his Hard gallery. He’s done plenty of equally exciting stuff and no major harm has come to his genitals (even after barbecuing them!)

  26. Veal Avatar
    Veal

    No one ever made me wish I had a cock more than Erebli 🙂 bless him!
    And attinoss, you should check out his Hard gallery. He’s done plenty of equally exciting stuff and no major harm has come to his genitals (even after barbecuing them!)

  27. Veal Avatar
    Veal

    No one ever made me wish I had a cock more than Erebli 🙂 bless him!
    And attinoss, you should check out his Hard gallery. He’s done plenty of equally exciting stuff and no major harm has come to his genitals (even after barbecuing them!)

  28. Veal Avatar
    Veal

    No one ever made me wish I had a cock more than Erebli 🙂 bless him!
    And attinoss, you should check out his Hard gallery. He’s done plenty of equally exciting stuff and no major harm has come to his genitals (even after barbecuing them!)

  29. penski Avatar

    Awesome. Only on Modblog would you get a comment along the lines of ‘I wish I had a cock so I could butcher it.’

    The pic reminds me of a squid… :/

    *n

  30. penski Avatar

    Awesome. Only on Modblog would you get a comment along the lines of ‘I wish I had a cock so I could butcher it.’

    The pic reminds me of a squid… :/

    *n

  31. penski Avatar

    Awesome. Only on Modblog would you get a comment along the lines of ‘I wish I had a cock so I could butcher it.’

    The pic reminds me of a squid… :/

    *n

  32. penski Avatar

    Awesome. Only on Modblog would you get a comment along the lines of ‘I wish I had a cock so I could butcher it.’

    The pic reminds me of a squid… :/

    *n

  33. Sade Avatar
    Sade

    i’m still really confused…yeah,this is so hopeless because while i know what i should be seeing,i still can’t see it.

  34. Sade Avatar
    Sade

    i’m still really confused…yeah,this is so hopeless because while i know what i should be seeing,i still can’t see it.

  35. Sade Avatar
    Sade

    i’m still really confused…yeah,this is so hopeless because while i know what i should be seeing,i still can’t see it.

  36. Sade Avatar
    Sade

    i’m still really confused…yeah,this is so hopeless because while i know what i should be seeing,i still can’t see it.

  37. Erebli Avatar
    Erebli

    Answer to some questions.
    1. The string, or small rope, was to pull the balls and hold them in place so they wouldn’t slip back.
    2. It wasn’t that painful. I went slow. BTW, I did get them down to less that three eights inch thick.
    3. I did not tie off the cock first.
    4. The balls returned to original size within 3 hours, and are still okay. In fact, I did a 1L saline infusion the next day. BTW, thanks to Veal, her statments are correct.
    5. For Sade, it is my balls looking up from the bottom, flattened to around three eights of an inch. My goal was to get them as flat as possible without bursting. I think that I could have gone for more, with more time. It took time, because I had to wait for them to get used to the pressure, then screw down more.

  38. Erebli Avatar
    Erebli

    Answer to some questions.
    1. The string, or small rope, was to pull the balls and hold them in place so they wouldn’t slip back.
    2. It wasn’t that painful. I went slow. BTW, I did get them down to less that three eights inch thick.
    3. I did not tie off the cock first.
    4. The balls returned to original size within 3 hours, and are still okay. In fact, I did a 1L saline infusion the next day. BTW, thanks to Veal, her statments are correct.
    5. For Sade, it is my balls looking up from the bottom, flattened to around three eights of an inch. My goal was to get them as flat as possible without bursting. I think that I could have gone for more, with more time. It took time, because I had to wait for them to get used to the pressure, then screw down more.

  39. Erebli Avatar
    Erebli

    Answer to some questions.
    1. The string, or small rope, was to pull the balls and hold them in place so they wouldn’t slip back.
    2. It wasn’t that painful. I went slow. BTW, I did get them down to less that three eights inch thick.
    3. I did not tie off the cock first.
    4. The balls returned to original size within 3 hours, and are still okay. In fact, I did a 1L saline infusion the next day. BTW, thanks to Veal, her statments are correct.
    5. For Sade, it is my balls looking up from the bottom, flattened to around three eights of an inch. My goal was to get them as flat as possible without bursting. I think that I could have gone for more, with more time. It took time, because I had to wait for them to get used to the pressure, then screw down more.

  40. Erebli Avatar
    Erebli

    Answer to some questions.
    1. The string, or small rope, was to pull the balls and hold them in place so they wouldn’t slip back.
    2. It wasn’t that painful. I went slow. BTW, I did get them down to less that three eights inch thick.
    3. I did not tie off the cock first.
    4. The balls returned to original size within 3 hours, and are still okay. In fact, I did a 1L saline infusion the next day. BTW, thanks to Veal, her statments are correct.
    5. For Sade, it is my balls looking up from the bottom, flattened to around three eights of an inch. My goal was to get them as flat as possible without bursting. I think that I could have gone for more, with more time. It took time, because I had to wait for them to get used to the pressure, then screw down more.

  41. RustY Avatar

    God damn BME. At first I cringed, then I got intrigued. Right now I can’t stop staring at the picture. If I had some dope right now, I don’t know what I’d be doing…

  42. RustY Avatar

    God damn BME. At first I cringed, then I got intrigued. Right now I can’t stop staring at the picture. If I had some dope right now, I don’t know what I’d be doing…

  43. RustY Avatar

    God damn BME. At first I cringed, then I got intrigued. Right now I can’t stop staring at the picture. If I had some dope right now, I don’t know what I’d be doing…

  44. RustY Avatar

    God damn BME. At first I cringed, then I got intrigued. Right now I can’t stop staring at the picture. If I had some dope right now, I don’t know what I’d be doing…

  45. jack6two Avatar
    jack6two

    my mind : it’s undefined what’s it really!

  46. jack6two Avatar
    jack6two

    my mind : it’s undefined what’s it really!

  47. jack6two Avatar
    jack6two

    my mind : it’s undefined what’s it really!

  48. jack6two Avatar
    jack6two

    my mind : it’s undefined what’s it really!

  49. Jayde Avatar
    Jayde

    so just balls, or penis too?

  50. Jayde Avatar
    Jayde

    so just balls, or penis too?

Latest Tattoo, Piercing, and Body Modification News

  • Twelve Points to the Sky
    There’s a particular kind of magic that happens at your first big suspension gathering when you arrive with nerves, an open heart, and the quiet hope of flight. Guided by the encouragement of mentor Lynn Loheide and driven by the quiet confidence of belonging, Alex… Read more: Twelve Points to the Sky
  • Ontario SusCon 2025
    In March 2025, BME attended the Ontario Suspension Convention in Hamilton, hosted by the Kevin Donaghy and the Ontario Suspension Collective. We had the pleasure to take part and help document the event, but also run a booth to sell a bunch of old (but… Read more: Ontario SusCon 2025
  • Welcome Back to Body Modification Ezine
    Dear BME Community, We’ve been gone far too long, but BME is back to give people a voice, a space, a community. With time everything evolves, and BME may be different than you remember. Our goal is to stay true to Shannon and Rachel’s values… Read more: Welcome Back to Body Modification Ezine
  • BME Social Media
    Word of mouth has been our method of reuniting the community, and it has brought a substantial amount of us together. I am inspired by your loyalty and I want to remind more people of BME’s existence. In 2020 we gained control over @bmezine on… Read more: BME Social Media
  • BMEShop
    Despite the hurricanes in 2015 which destroyed almost all of what Rachel owned, she managed to save the original inventory from BME. We have relisted some of the stock on BMEShop.com with the hopes you may be interested.  Our first drop includes a selection of… Read more: BMEShop
  • Rachel Larratt 1980-2022
    Unfortunately, when we lost some of the ModBlog content, it included the post about Rachel’s passing. (Original Post) Rachel passed away on June 22, 2022. She died in her sleep. Even now, it’s extremely difficult to write this post. Rachel meant so much to so… Read more: Rachel Larratt 1980-2022