An UPDATE of Exploring the Future...A Millenium PA

At A Glance Author Bizonal Contact bizonal@hotmail.com Artist Desiree Studio Big City Tattoo and Body Piercing Location Jacksonville, Florida

This is an "UPDATE" to my original experience posted her under the title "Exploring the Future...A Millennium PA". If you haven't already read it, check out the following link:

http://www.bmezine.com/pierce/09-male/pa/991128/paexplor.html

It's been over 4 months now since I had that first stick of the needle, and I...along with my wife, am enjoying my Prince Albert more and more everyday.

You may recall that is was on Friday, November 19th, 1999 that I went down to Big City Tattoo and Body Piercing in Jacksonville, Florida and received my PA. I know that Desiree had told me to "stay off of it for two weeks", but my curiosity got the best of me, and within about 8 days of receiving my PA, my wife masturbated the hell out of my cock to see what it would feel like. Let me tell you my friends, it was fucking AWESOME. I shot my load so hard and intense that first time that I thought I was going to pass out right there in front of the bathroom sink. Damn...what a feeling!!! My wife even commented that she had never seen me cum like that before!

After about 3 weeks of receiving the PA, it was time for my wife and I to give it the true test. After some excellent foreplay, my wife went down on me in her typical manner. Let me tell you, that was a mind blowing experience in itself. However, my wife did comment that giving a blowjob with the CBR was more difficult for her, as she sometimes like to get really aggressive when she's going at it. She commented many times that she was afraid she was going to chip a tooth.

Continuing on with some additional foreplay on my part, I felt that it was that time to don the old condom and dive into the sweet pie that lay before me! My wife and I got into the typical missionary position and took it REAL slow at the beginning, as I didn't want to overdue it. At first I thought I might cum immediately because I was so worked up, but I just concentrated on the AWESOME feeling that was coming over me, and I was able to prevent any premature ejaculation. We went at it for about 10 minutes until I felt myself on the brink of cumming. I told my wife that it was to early for that, and that I wanted to try another position.

The second position for us that evening was for her to sit on top of me while I lay on my back. My wife just loves this position, as I do also, because it seems that her pussy just swallows my cock to the hilt. We went at it in this position for about another 10 minutes before I felt the urge to cum once again. We slowed up, and she dismounted me. Minutes later I told my wife that I wanted to fuck her in my favorite position. She obliged to my request, lay on her back, crossed her left leg over her right leg, and exposed her beautiful pussy from behind her. I mounted her from that position, and within about 1 minute I was cumming loads for what felt like about 5 minutes, although it was probably only thirty seconds. After that I felt exhausted and "drained", and fell on top of her to catch my breath. "DAMN WAS THAT GREAT" we both said.

After about 1 month had passed since getting the PA, I felt that it was time to start stretching the piercing, as I wanted to upgrade to the next recommended CBR size. You may recall in my original experience that Desiree told me that she would be using a 12-gauge 3/4 inch Captive Bead Ring for the PA. Well, unbeknownst to me, she actually used a 10 gauge 5/8" Captive Bead Ring for the PA. I stumbled on this fact when I ordered a 10 gauge CBR over the net, and I received the EXACT same size that I was currently wearing. When I took the CBR down to Big City Tattoo and Body Piercing to get their opinion on the size, I was told that it was truly a 10 gauge 5/8" CBR. After finding this fact out, I purchased an 8 gauge 5/8" CBR from Big City Tattoo and Body Piercing, and drove home to make the "upgrade".

Once home, I removed the 10 gauge CBR that I was wearing, cleaned the 8 gauge CBR that I had just purchased, and inserted the 8 gauge CBR with the help of some antibacterial soft-soap. I was extremely happy when the 8 gauge CBR just slipped in with no problem at all. Now it was time to see how the 8 gauge CBR felt during sex for my wife and I.

As I am sure you can imagine, sex was getting even better for the two of us with this newly "upgraded" ring! This new size didn't seem to "pinch" and "dig" into the tip of my cock as much as the previous CBR did. As we went about our sexual act, I became more aware of how GREAT the fucking was for the two of us. My wife even commented that she could actually feel the bead on the ring touch her deep inside, and it made her want more...and more...and more!!! We must have fucked for a few hours, and then again, we both basically passed out after we simultaneously came!

After about the second month, I was ready to "upgrade" to the next CBR size. I did some looking around on the net for some less expensive jewelry, and found what I was looking for at http://www.metalworx.com. This time I purchased a 6 gauge 5/8" CBR. After patiently waiting for the CBR to arrive in the mail, I finally received it after about 2 weeks. It was then that I removed the 8 gauge CBR, went about cleaning the new 6 gauge CBR, and made my first attempt to insert the ring in the PA hole with the help of the antibacterial soft-soap. This time however, I wasn't having much luck with the "upgrade". As I continued to try to "force" the 6 gauge CBR into the hole, I was having second thoughts of making this "upgrade" as I was getting VERY sore from my attempts. After about 15 minutes, I finally gave up, and reinserted the 8 gauge CBR.

The next few days after my attempted "upgrade" to the 6 gauge CBR, my PA was VERY sore. After taking it easy with the PA for about 1 week, I started to pull and tug on the ring to help stretch the hole. Within a few days, I was finally able to insert the 6 gauge CBR into the hole, but still became sore after my 5 minutes of trying. The week following this "upgrade" was another week of soreness for my PA and I.

It was about 2 weeks after the "upgrade" to the 6 gauge CBR that my wife and I had had sex again. And as in the past, it was only getting better for the two of us! We played...we fucked...and we passed out from exhaustion and EXTREME satisfaction. I often thought about how it would feel with even a bigger "upgrade".

It's now been over 4 months since I got the PA, and I am now ready to "upgrade" to the next size. Unfortunately though, http://www.metalworx.com doesn't carry the 4 gauge CBR that I want, so I ended up doing some more searching for this CBR gauge. While hitting what felt like every piercing web site on the net, I once again stumbled upon another site that I was able to order online. The site, http://www.capricornslair.com had the size I wanted at a reasonable price, so of course, I placed my order. This time, I only waited 3 days for the CBR to arrive.

I had been tugging and pulling on the 6 gauge ring for the past week, so I felt very strongly that the 4 gauge CBR would slide in, just as easy as the 8 gauge "upgrade" did. However, when I went to remove the Steel Bead from the CBR, I couldn't expand the ring enough using the opening pliers that I currently have. I tried...and tried, but all I ended up doing was bending the pliers to the point that they won't open any of the rings that I have. Feeling discourage...and somewhat pissed off, I got back on http://www.capricornslair.com and ordered me a 4 gauge 5/8" Circular Barbell with threaded bead closures. I figured by purchasing that item, I won't need any opening pliers! Hopefully, I should see the barbell in the mail within the next few days!

Well my friends, that's about it for now. Thanks for allowing me to share my experiences with you all, and should you have any questions, please feel free to send me an e-mail at... bizonal@hotmail.com. Stay tuned for more as time goes by!

Later!